#Operating a hyundai excavator r55 full#
#Operating a hyundai excavator r55 iso#

Load point height m (ft) Load radius 2.0 m (7 ft) 3.0 m (10 ft) 4.0 m (13 ft) 5.0 m (16 ft) Capacity Reach m (ft ) At max. Lifting Capacity R55-9 Rating over-front Rating over-side or 360 degree Boom : 3.0m (9вЂ™ 10вЂќ) / Arm : 1.6 m (5вЂ™ 3вЂќ) / Bucket : 0.18m3 (0.24yd3) SAE heaped / Dozer blade down with 230kg (510 lb) counterweight. Of lower roller on each side *Arm weight including cylinder and linkage. X - leg type Pentagonal box type 40 1 5 Center frame Track frame No. The undercarriage includes lubricate rollers, track adjusters with shock absorbing springs and sprockets, and track chain with triple grouser shoes. Mono boom with blade Operating weight Operating weight 5,650 kg ( 12,460 lb) Undercarriage X-leg type center frame is integrally welded with reinforced box-section track frames.

#Operating a hyundai excavator r55 full#

Pilot control Traveling and steering External Lights Two joysticks with one safety lever (LH): Arm swing, Boom swing (RH): Boom and bucket (ISO) Two levers with pedals Two lights mounted on the boom, one light mounted under the battery box one light mounted under the cabin Major component weight Upperstructure Counterweight Mono boom(with arm cylinder) 2,710 kg ( 5,970 lb) 230 kg ( 510 lb) 310 kg ( 680 lb) Operating weight (approximate) Operating weight, including 3,000 mm (9вЂ™ 10вЂќ) boom, 1,600 mm (5вЂ™ 3вЂќ) arm, SAE heaped 0.18 m3 (0.24 yd3 ) digging bucket, lubricant, coolant, full fuel tank, hydraulic tank and the standard equipment.

#Operating a hyundai excavator r55 iso#

Travel speed(high) / (low) Gradeability Parking brake Full hydrostatic type Axial piston motor, in-shoe design Planetary reduction gear 5,300 kgf (11,700 lbf) 4.0 km/hr (2.5 mph) / 2.2 km/hr (1.4 mph) 35o (70%) Multi-wet disc Swing system Swing motor Swing reduction Swing bearing lubrication Swing brake Swing speed Axial piston motor Planetary gear reduction Grease-bathed Multi wet disc 9.3 rpm Coolant & Lubricant capacity (Refilling) Fuel tank Engine coolant Engine oil Swing device-gear oil Final drive(each) Hydraulic tank Hydraulic system liter 125.0 9.5 11.6 1.5 1.2 70.0 120.0 US gal 33.0 2.5 3.1 0.4 0.3 18.5 31.7 UK gal 27.5 2.1 2.6 0.3 0.3 15.4 26.4 DIgging force Arm Bucket digging force Arm crowd force Length Weight SAE ISO SAE ISO 1,600 mm (5' 3') 210 kg (460 lb) 37.7 kN 3,850 kgf 8,490 lbf 42.4 kN 4,330 kgf 9,550 lbf 28.4 kN 2,900 kgf 6,390 lbf 31.9 kN 3,260 kgf 7,190 lbf 1,900 mm (6' 3') 230 kg (510 lb) 37.7 kN 3,850 kgf 8,490 lbf 42.4 kN 4,330 kgf 9,550 lbf 25.5 kN 2,600 kgf 5,730 lbf 28.7 kN 2,930 kgf 6,460 lbf Controls Pilot pressure operated joysticks and pedals with detachable lever provide almost effortless and fatigueless operation. Of cylinder bore X stroke Boom: 1-110 x 715 mm (4.3вЂќ x 28.1вЂќ) Arm: 1-90 x 850 mm (3.5вЂќ x 33.5вЂќ) Bucket: 1-80 x 660 mm (3.1вЂќ x 26.0вЂќ) Boom swing: 1-95 x 527 mm (3.7вЂќ x 20.7вЂќ) Dozer blade: 1-110 x 224 mm (4.3' x 8.8') Relief valve setting Implement circuits Travel circuit Swing circuit Pilot circuit Service valve 220 kgf/cm2 (3,130 psi) 220 kgf/cm2 (3,130 psi) 220 kgf/cm2 (3,130 psi) 30 kgf/cm2 (430 psi) Installed travel system Drive method Drive motor Reduction system Max. Flow Sub-pump for pilot circuit Cross-sensing and fuel saving pump system Two variable displacement piston pumps 2 X 55 в„“/min(14.5 US gpm/12.1 UK gpm)pumps Gear pump Hydraulic system Hydraulic motors Travel Swing Two speed axial piston motor with counter balance valve and parking brake Axial piston motor with automatic brake Hydraulic cylinders No. Torque Bore X stroke Piston displacement Batteries Starting motor Alternator 20.5 kgf.